COMPUTER BASICS: SETTING UP YOUR COMPUTER HARDWARE Back to COMPUTER BASICS HOME

SETTING UP YOUR COMPUTER HARDWARE

Doesn't matter how you got to my article but this is how you set up your new PC. So you have a new computer and are ready to set it up. While this may seem like an overwhelming and difficult task, it is really very simple. It does not matter what name brand of computer you have, as most computers are set up in a very similar way.

Are you ready?

Step 1: Unpack the monitor and computer case from the box. Remove any plastic covering or protective tape. Place the monitor and the computer case where you wish on the desk or work area. Think about where you want your desk or work area to be located, and where you want your monitor, computer case, and other hardware. Be sure to place your computer case in an area that is well ventilated and that has good air flow. This will help to prevent overheating.

Step 2

Locate the monitor cable. It will usually be either a VGA or a DVI cable. VGA cables will often have blue connectors to make them easier to identify. (If you have an all-in-one computer that's built into the monitor, you can skip to Step 3) Connect one end of the cable to the monitor port on the back of the computer case, and the other end to the monitor. Hand-tighten the plastic-covered screws on the monitor cable to secure it.Many computer cables will only fit a specific way. If the cable doesn't fit, don't force it, or you might damage the connectors. Make sure the plug aligns with the port, and then connect it..

Step 3

Unpack the keyboard and determine whether it uses a USB (rectangular) connector or a PS/2 (round) connector. If it uses a USB connector, plug it into any of the USB ports on the back of the computer. If it uses a PS/2 connector, plug it into the purple keyboard port on the back of the computer. Unpack the mouse and determine whether it uses a USB (rectangular) connector or a PS/2 (round) connector. If it uses a USB connector, plug it into any of the USB ports on the back of the computer. If it uses a PS/2 connector, plug it into the green mouse port on the back of the computer. If you have a wireless mouse or keyboard, you may need to connect a Bluetooth dongle (USB adapter) to your computer.

Step 4

If you have external speakers or headphones, you can connect them to your computer's audio port (either on the front or the back of the computer case). Many computers have color-coded ports. Speakers or headphones connect to the green port, and a microphone can connect to the pink port. The blue port is the line in, which can be used with other types of devices. Some speakers, headphones, and microphones have USB connectors instead of the usual audio plug. These can be connected to any USB port. In addition, many computers have speakers or microphones built into the monitor.

Step 5

Locate the two power supply cables that came with your computer. Plug the first power supply cable into the back of the computer case, and then into a surge protector. Then, using the other cable, connect the monitor to the surge protector. Finally, plug the surge protector into a wall outlet. You may also need to turn the surge protector on if it has a power switch. If you don't have a surge protector, you can plug the computer directly into the wall. However, this is not recommended, as electrical surges can damage your computer.

Still Alive?

Your setup is complete - Your basic computer hardware is now set up. Before you start it up, spend a little time arranging your workspace. A workspace that is arranged well can improve your productivity and also promote health.